-
Hammerite Aerosol Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one. It gives the metal a subtle hammered effect with a metallic sheen.
-
APPLICATIONS:
- Direct to Rust
- Metal Door
- Metal Garden furniture
- Metal Gate
- Metal Railings
PAINTING GUIDES:
- Finish: Hammered
- Coverage: 400ml covers up to 0.5m²
- Drying Time: 4 hours touch dry, 6 hours - re-coatable
- Repaintable after: 15 minutes
- Usage: Exterior
-
Using spray paint is an easy way to protect and revive your metal objects. Follow the guide below if you want to know exactly how to spray paint metal:
- 1. Abrade smooth surfaces and remove all loose and flaking paint with a wire brush. Remove dirt and dust with diluted detergent. Remove grease with Hammerite Brush Cleaner & Thinners. Then rinse with clean water and allow time to dry.
- 2. Spray a test patch of Hammerite Direct to Rust Metal Paint onto painted surfaces and leave for 1 hour.
- 3. If there is no reaction apply Hammerite Direct to Rust Metal Paint directly to surface.
- 4. If there is a reaction remove all paint before applying Hammerite Direct to Rust Metal Paint.
- 5. On bare zinc, aluminium and galvanised surfaces, apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint.
- 6. Store aerosol at room temperature for 2 hours prior to use.
- 7. Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes.
- 8. Apply light even coats, from a distance of approximately 15cm (6 inches) and keep the aerosol moving. Do NOT concentrate spray in one spot.
- 9. Apply 3-4 coats for maximum protection and allow 15 minutes between coats. Between coats invert can and spray for 2 seconds to avoid blockages.
- 10. Touch dry 15 minutes, recoat after 15 minutes.
