HAMMERITE

Hammerite Direct to Rust Metal Paint Aerosol Satin Finish (Black)

Pick Up & Delivery Options
  • A satin sheen finishes for a more subtle effect.
  • Dries quickly.
  • The specially formulated Hammerite Direct to Rust Metal Paint Aerosol Satin Finish serves as primer, undercoat and topcoat in one. All with the subtle effect of the satin finish.

  • APPLICATIONS:

    • Direct to Rust
    • Metal Door
    • Metal Garden furniture
    • Metal Gate
    • Metal Railings

    PAINTING GUIDES:

    • Finish: Satin
    • Coverage: 400ml covers up to 0.5m²
    • Drying Time: 4 hours touch dry, 6 hours - re-coatable
    • Repaintable after: 15 minutes
    • Usage: Exterior
  • Using spray paint is an easy way to protect and revive your metal objects. Follow the guide below if you want to know exactly how to spray paint metal:

    • 1. Abrade smooth surfaces and remove all loose and flaking paint with a wire brush. Remove dirt and dust with diluted detergent. Remove grease with Hammerite Brush Cleaner & Thinners. Then rinse with clean water and allow time to dry.
    • 2. Spray a test patch of Hammerite Direct to Rust Metal Paint onto painted surfaces and leave for 1 hour.
    • 3. If there is no reaction apply Hammerite Direct to Rust Metal Paint directly to surface.
    • 4. If there is a reaction remove all paint before applying Hammerite Direct to Rust Metal Paint.
    • 5. On bare zinc, aluminium and galvanised surfaces, apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint.
    • 6. Store aerosol at room temperature for 2 hours prior to use.
    • 7. Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes.
    • 8. Apply light even coats, from a distance of approximately 15cm (6 inches) and keep the aerosol moving. Do NOT concentrate spray in one spot.
    • 9. Apply 3-4 coats for maximum protection and allow 15 minutes between coats. Between coats invert can and spray for 2 seconds to avoid blockages.
    • 10. Touch dry 15 minutes, recoat after 15 minutes.